All Marine Spares International has been named as the Authorized Dealer for Alfa Laval. Detailed information can be found below along with important links.

Alfa Laval is a leading global provider of first-rate products in the areas of heat transfer, separation and fluid handling. With these as its base, Alfa Laval aims to help enhance the productivity and competitiveness of its customers in various industries throughout the world. We define their challenges and deliver sustainable products and solutions that meet their requirements – mainly in energy, the environment, food and the marine industry.

Oil Cleaning

S and P Flex

The Alfa Laval S and P Flex range of separators is ideal for all fuel and lubricating oils. The high degree of system flexibility enables you to configure a separator specific to your application, thereby ensuring maximum protection and efficiency.

Protect your engine from expensive wear

  • Tailor to specific needs – flexible systems with a range of options
  • Proven performance – the world’s best-selling separator for fuel and lube oil
  • Cost-effective investment
  • Space-saving modularized footprint
  • Biofuel ready – compatible with HVO (EN15940) and with FAME (EN14214 or ASTM D6751) blends comprising HFO and/or distillate

With the Alfa Laval S and P Flex range you can tailor your separator system to your specific performance and space requirements while simultaneously fulfilling the required cybersecurity profile* for marine separator systems. The advanced S separator uses Alfa Laval ALCAP™ technology to adjust to your oil, maximizing protection and fuel economy. The P separator is a high-performance alternative for oils with fewer process issues. The system is built on a low-wear mechanical platform that further reduces lifecycle costs.

*In compliance with the unified requirements specified by IACS in UR E27 Cyber resilience of on-board systems and equipment – Rev.1 Sep 2023 Clean

Oil Cleaning

PureBilge

Alfa Laval PureBilge is a fully automated centrifugal separation system that cleans oily water effectively at sea. With options to reduce oil pollution below 5 ppm –far tougher than the 15 ppm IMO requirement – it sets a new standard in making water safe for discharge overboard.

Reliable, efficient, continuous

  • Compact, modular, easy-to-install system saves time, space and money
  • Continuous, single-stage operation requires less holding tank volume and provides more payload capacity
  • Reduced operating costs thanks to low maintenance, automated control, minimal waste disposal, no chemical consumption and no disposable filter element
  • Unaffected by sea heave, oil shocks or high solids loading
  • Password-locked switch ensures only those responsible for environmental compliance may authorize discharge

Alfa Laval PureBilge is a high-speed centrifugal oily water separation (OWS) system that cleans large volumes. Its superior separation performance stems from the patented XLrator spiral inlet, which prevents oil droplets splitting and additional emulsions forming. It is even available for smaller vessels as PureBilge Compact.

PureBilge Compact is specifically designed for vessels requiring only a smaller treatment capacity and can be installed on a new vessel or retrofitted on an existing one.

They do not require chemicals, adsorption filters or membranes and they reduce operating costs by being designed for 24/7 unmanned operation.

Filtration

Filtering Elements

Alfa Laval Moatti self-cleaning filters for fuel oil, lubricating oil, and hydraulic control oil provide high-performance filtration with virtually no pressure drop. They protect a wide range of diesel engines and help engine builders, integrators, and machine operators live up to strict emission standards. Innovative Atrium 2.0 technology enables larger filtering areas, in a more compact design. Optional treatment systems efficiently remove solids in the backflushed oil.

Don’t let cartridges clog your operation

Alfa Laval Moatti 180 automatic, continuously self-cleaning filters use state-of-the-art Atrium 2.0 technology to keep lubrication oil cleaner, longer. Tough and reliable, Moatti 180 filters are designed to protect engines from contaminants and debris and keep them running smoothly, with minimized risk of unplanned downtime. And because they are cartridge-free, Alfa Laval Moatti 180 filters cut out a vast waste stream and eliminate hours of hazardous, unnecessary maintenance work.

Service made simple

No downtime. No unexpected filter changes. That’s what your customers get from the Alfa Laval Moatti ReMan service solution. This unique service concept was created with circularity in mind. We guarantee you a fully warranted remanufactured filter, certified by Alfa Laval, that meets all specifications. Plus, Alfa Laval takes full responsibility for the care, maintenance, and flawless functioning of all Moatti filters throughout the lifetimes of the engines where they are installed. And it’s as reliable and trouble-free as an Alfa Laval Moatti filter itself.

Biofuel ready 

Moatti 152, Moatti 180, and Moatti 290 fuel oil filters are suitable for use with biofuels of the following type: Fatty Acid Methyl Esters (FAME), compliant with EN 14214   and Hydrotreated Vegetable Oils (HVO) and blends of these with ISO 8217–compliant hydrocarbon fuels.

Fuel oil filters

Alfa Laval fuel oil filters provide full-flow filtration of heavy fuel oils for two-stroke and four-stroke diesel engines. They are available in a large range of filtration grades.

Lubricating oil filters

Alfa Laval lubricating oil filters provide full-flow filtration of lubricating oils for trunk piston and crosshead engines. Types 160, 240, 280 and 350 cover all lubricating oil flows.

Moatti 152 filters

With high-efficiency fuel oil filtration for four stroke or small two stroke engines. The 152 filter is a proven filter solution, protecting your engine from catalytic fines and fuel instability.

Moatti 180 filters

Our most compact system yet, the 180 filters don’t compromise on filtering area while still delivering high efficiency fine filtration with virtually no pressure drop.

Moatti 240 filters

The 240 filters are compact and light-weight full flow lubrication oil filters for high-speed four stroke engines. The ideal replacement for traditional cellulose cartridge spin-on filters.

Moatti 290 filter

Alfa Laval Moatti 290 filters utilize the original Atrium technology for automatic self-cleaning filters. Our most modular range, the 290 filters will adapt to meet your requirements with precision.

Moatti 350 filters

Providing full flow filtration of lubricating oils for medium-speed trunk piston and crosshead engines, the Moatti 350 range is nevertheless compact and autonomous thanks to its hydraulic drive.

Sludge Dewatering

PureDry

Recover oil while reducing waste handling costs. Alfa Laval PureDry is an automated system that separates waste oil into three phases: cleaned oil, water and super-dry solids.

Automated and modular

  • Processes continuously at flow rates of up to 300l/h
  • Compact, modular system, install in any space
  • Integrates with onboard systems
  • Smart automation adapts process control to feed conditions
  • No water consumption or additional waste generated

Alfa Laval PureDry cuts your waste handling and disposal costs. The system eliminates your oily waste by removing water and concentrating solids to a super-dry sludge. Its efficiency allows you to reduce holding tank volumes, freeing up space. You can even achieve fuel savings of up to 0,4% if FO and LO waste are stored separately.

Fresh Water Generation

Our broad portfolio of desalination solutions from 0.5-1000 m3/24hrs, with evaporation technology helps to produce high quality fresh water from seawater utilizing the waste heat onboard. The Alfa Laval AQUA Blue family of freshwater generators redefines compact and efficient, using the three-in-one plate technology that cuts seawater and electrical power requirements in half which lowers your initial investment, simplifies installation and shrinks carbon footprint.

Smart desalination for any capacity

  • Wide range of desalination solutions suitable for all kinds of vessels
  • Thermally driven process, improving energy efficiency and reducing emissions
  • Produces high quality freshwater, less than 2 ppm

AQUA – Single stage freshwater generator

AQUA Blue freshwater generators turn seawater into high-quality fresh water with an optimized process in a single plate pack. AQUA technology cuts seawater flow needs in half. Capacity: 1–60 m3/day.

AQUA Blue E2 – Two stage freshwater generator

The two-stage AQUA Blue E2 produces fresh water with 50% less electrical power than conventional technology – and needs half the waste heat compared to single-stage models. Capacity: 20–100 m3/day.

DPU-2 – Two Stage Fresh Water Generator

Conversion of seawater into freshwater by vacuum distillation for the supply of high quality freshwater for domestic and process utilization.

HWL – Hot water loop

For additional heating and circulation of hot water to the freshwater generator.

MEP – Multi-effect plate evaporator

This product range covers capacities from 200–1,000 m3/day per unit, and each unit is custom designed for each particular installation.

EGR Water Treatment

PureNOx

Alfa Laval PureNOx has long been the choice for water treatment in Exhaust Gas Recirculation (EGR), a leading technology for Tier III NOx compliance. Today it’s available in an even more streamlined solution – PureNOx LS (Low Sulphur) – that supports both Tier III NOx compliance and Tier II fuel savings. PureNOx LS is optimized for EGR engines that operate on low-sulphur fuel. Upon request, solutions for use with high-sulphur fuel can also be tailored using PureNOx technology.

The EGR water cleaning solution with most time at sea

  • Compact and robust separator with high efficiency
  • Designed for continuous operation
  • Low operating costs – no filters to replace
  • Connectivity-ready and supported 24/7 worldwide
  • Compliant with MEPC.307(73) and optionally with MEPC.259(68)

PureNOx LS uses proven and highly efficient separator technology, rather than costly filters or sensitive membranes. PureNOx LS (Low Sulphur), which is optimized for EGR engines that operate on low-sulphur fuel, is available in two sizes. PureNOx LS 50 is for smaller vessels with engines up to 16 MW, while PureNOx LS 100 handles engine capacities up to 60 MW (45 MW on LNG).

Fuel Supply

Fuel conditioning modules

There are always challenges on the horizon when it comes to the marine industry. Whether that’s due to different legislations around emissions, through fuel costs, or through upgrading the engines, there will always be some things that remain uncertain. With Alfa Laval’s range of Fuel Conditioning Modules, though, you can be prepared for whatever the future holds.

A range of boosters to meet any fuelling needs

  • We offer a full range of boosters that make it possible to find exactly the right solution for the fuel you are investing in
  • Smooth ramping to ensure that engine parameters are always met, and that there’s no risk of seizure
  • Automated changeover process to ensure you can make more use of your time and resources, with no need for direct human input
  • Capability to switch to greener fuels, knowing you will have the booster with the right capability to help reduce environmental impact

Alfa Laval have been engineering fuel boosters for years, and our fuel conditioning modules in the field are backed up by thousands of smooth operating hours. Our options for alternative fuels are proven, reliable, and efficient, and can help you make the move towards running cleaner vessels. They’re user friendly with an intuitive touch-screen panel, and offer the automation you need to get the right results every time.

ACS

The FCM One Gas is designed for LNG conditioning in accordance with the pressure, temperature and flow guidelines of dual-fuel ME-GI engines.

FCM 1.5

Alfa Laval FCM 1.5 Oil is a booster system built to feed the fuel oil to the engines at the right flow, pressure, viscosity and cleanliness.

FCM LPG

The FCM One Oil can meet the full range of fuel conditioning needs, from the basic to the most advanced.

Products Brochure

Visit Alfa-Laval here: https://www.alfalaval.us/industries/marine-and-transportation/marine/